Position: Home > Hotpot News > What are the materials of the induction cooker hot pot table?
Catalogues

What are the materials of the induction cooker hot pot table?

Foshan Wanyene Furniture | Wanyene Hotpot News | 2017-12-05
What are the materials of the induction cooker hot pot table? The induction cooker hot pot table as the name suggests the induction cooker is a hot pot table using 220V power supply.
 
The material of the dining table must be widely used for the use of insulating materials. It is used in hotels, restaurants, government units, commercial kitchens, etc., which is very suitable for use in an open flame ban environment.
 
(1) FRP has light weight, high strength and good corrosion resistance
 
The FRP table top is made of special price of tempered glass, which is cheap and easy to use.
 
(2) Stainless steel has the characteristics of corrosion resistance, pitting corrosion resistance, rust resistance and wear.
 
The chemical corrosion resistance and electrochemical corrosion resistance of the stainless steel hot pot table are the best in steel, second only to titanium alloy. Heat resistant, high temperature resistant, low temperature resistant and even ultra low temperature resistant.
 
Its disadvantages are mainly high cost and expensive; in addition, stainless steel is not resistant to corrosion by alkaline media.
 
(3) Artificial marble material,
 
The price of artificial marble has been favored by consumers. It is also one of the most popular types of marble on the market today. It can bring an aesthetic effect to the room. Natural stone is dominant, even for relatively poor marble, the hardness is much higher than most artificial stone; do not worry about wear and tear, but the repair after wear is also very difficult, smoothing is more troublesome; artificial stone is much better, gap Very small, not easy to leak (not easy to stain); natural stone must be surface care before it can be put into use; but not easy to dye does not mean not dyeing - I have introduced such a story on TV, I also personally experienced Yes, so now I am considering returning to the stainless steel basin.
 
(4) Solid wood dining table material
 
The solid wood dining table is made of solid wood as the main material for dining. There are many solid wood materials used for making dining tables on the market, such as: North American black walnut, walnut glutinous rice, Wujinmu, ash, red rose, nanmu, Rubber wood, eucalyptus, birch, pine, fir, teak, cherry, mahogany, cedar, eucalyptus. To know what wood table is good, we can also look at ash. The ash is of medium material, and the wood grain is beautiful and generous, but it also has the disadvantage of deformation and contraction. Therefore, the solid wood dining table should have less ash material.

Original article, reprinted please mark the source




Next Article:What are the daily necessities stuff that are often used to maintain hot pot tables?
Previous Article:Is the hot pot table harmful?
Back to
Top